51 16 212 Removing and installing trim for storage compartment

Special tools required:

• 00 9 317

Necessary preliminary tasks: 

Version with manual transmission: 

• Remove Gaiter For Gear Lever

Version with automatic transmission: 

• Remove Finisher For Preselector Lever 

Release trim (1) with special tool 00 9 317 from retainers (2).

If necessary, disconnect plug connections and remove trim (1) towards top.

Fig 1: Identifying Trim, Special Tool (00 9 317) And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts on trim (3) must not be damaged or missing:

1. Clips
2. 4 x foam material
   Fig 2: Identifying Trim, Clips And 4 X Foam Material

   Courtesy of BMW OF NORTH AMERICA, INC.