51 13 316 Removing and installing/replacing trim strip on roof gutter at left or right

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Make sure that body is not damaged.

Starting at front, release trim strip (1) with special tool 00 9 317 from clips (2).

Installation:

To avoid leaks and noises, check all clips (2) for visible damage.

If necessary, replace faulty clips (2).

Align clips (2) on body and fit trim strip (1).

Fig 1: Identifying Roof Gutter Trim Strip And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) must not be damaged.

Fig 2: Identifying Roof Gutter Seals

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: