51 12 828 Removing and installing/replacing left or right guide for rear bumper

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: The operation is described on the left side; proceed in the same way for the right side.

Unscrew nuts (1).

Remove guide (2).

Fig 1: Identifying Rear Bumper Guide And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on holder (2) must not be damaged or missing.

Fig 2: Identifying Rear Bumper Holder And Catches

Courtesy of BMW OF NORTH AMERICA, INC.