52 16 048 Removing and installing or replacing thigh support on left or right front seat (sport/electric)

WARNING: This page is about a different variant/trim than selected.

Release thigh support (1) and move forward.

Lever welt (3) of seat cover (2) out of thigh support (1).

Fig 1: Identifying Seat Cover, Welt And Thigh Support

Courtesy of BMW OF NORTH AMERICA, INC.

Keep actuator (1) pressed in order to unlock centring element (2).

Carefully raise end stop (3) for thigh support with a screwdriver and at same time pull thigh support forwards out of guide rails.

Fig 2: Identifying Actuator, Centering Element And End Stop

Courtesy of BMW OF NORTH AMERICA, INC.

Do not extend thigh support to its full extent.

View of thigh support mechanism:

End stop for thigh support
Locking mechanism for thigh support

Fig 3: Identifying End Stop And Locking Mechanism For Thigh Support
Courtesy of BMW OF NORTH AMERICA, INC.

View of seat frame mechanism:
Guide rail on seat with depth arrester
Guide rail on seat with end stop

Fig 4: Identifying Depth Arrester And End Stop Of Seat Frame Guide Rail
Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

NOTE: Check guide rails (2) and adjustment mechanism (3) for damage.

Fig 5: Identifying Guide Rails, Plug Connection And Seat Adjustment Mechanism

Courtesy of BMW OF NORTH AMERICA, INC.