54 12 115 Removing and installing glass slide/tilt sunroof lid

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release left and right screws (1).

Lift glass slide/tilt sunroof lid upwards to remove.

Installation:

Replace screws and insert with Loctite.

Adjust glass slide/tilt sunroof lid.

For tightening torque refer to 54 12 2AZ in 54 12 MECHANICAL SUN ROOF COMPONENTS .

Initialize glass slide/tilt sunroof.

Fig 1: Identifying Sunroof Gaiter Screws

Courtesy of BMW OF NORTH AMERICA, INC.