24 30 Hydraulic / electric control parts and controlling elements
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - HYDRAULIC / ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Valve body to transmission | 3HP-22 | M6 | 11 Nm | |
| 4HP-22 / 4HP-24 / A5S 310Z / A5S 440Z / A5S 300J / A5S 325Z / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 8 Nm | ||
| A4S 270R / A4S 310R | 5/16 inch | 20 Nm | ||
| A5S 360R / A4S 360R | M6 | 11 Nm | ||
| A5S 560Z | M6 x 12 | 6 Nm | ||
| A5S 560Z | M6 x 55 | 8 Nm | ||
| GA6L45R | M5 Torx | 8 Nm | ||
| 2AZ Valve housing to valve body | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 310Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 5 Nm | |
| 3AZ Adapter plate on shift unit | A4S 270R / A4S 310R | 13 Nm | ||
| 4AZ Input and output speed sensors to mechatronics | M6 | 12 Nm |