16 14 500 Removing and installing or replacing control unit for electric fuel pump
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)
.
Necessary preliminary tasks:
- E81, E87, E91 and E92:
- E90:
Remove Backrest
Disconnect plug connection (1).
Release nuts (2) and remove control unit (3).
Installation:
For tightening torque refer to 16 14 2AZ in 16 14 FUEL PUMP .
Replacement:
- Carry out programming/coding