16 12 010 Removing and installing/replacing carbon canister (DMTL)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove cover from rear right bumper.
Disconnect plug connection (1).
Unlock quick-release fasteners (2) and disconnect vent lines.
Release screws (3) and remove carbon canister (4).
Installation:
For tightening torque refer to 16 13 1AZ in 16 13 TANK VENTILATION .