LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1929 (Cooling System - Repair) >> Engine Radiator With Attachment >> 17..... Replace the mounts for the module carrier on top and bottom (N63, N74) >> Removing the rubber mount for the top module carrier

Removing the rubber mount for the top module carrier

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rubber mount (1) from the upper section of the module carrier from the top.

Fig 1: Identifying Module Carrier Rubber Mount
G08504310Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Apply mounting lubricant to the new rubber mounts (1) prior to installation.

Fig 2: Identifying Rubber Mount
G08504311Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals