LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1833 (Cooling System - Repair) >> Engine Radiator With Attachment >> 17..... Replace the mounts for the module carrier on top and bottom (N63, N74) >> Removing the rubber mount for the top module carrier

Removing the rubber mount for the top module carrier

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rubber mount (1) from the upper section of the module carrier from the top.

Fig 1: Identifying Rubber Mount
G08504310Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Apply mounting lubricant to the new rubber mounts (1) prior to installation.

Fig 2: Identifying Rubber Mount
G08504311Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals