Installation example
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
For bearing 1 with code letter A on the crankcase and code number 1 on the crankshaft bearing shell (1) with the color Yellow is required for the crankcase and bearing shell (2) with the color Yellow for the crankcase lower half (bedplate).
Bearing 2: A and 2 colors Yellow and Green.
Bearing 3: B and 2 colors Green and Green.
Bearing 4: C and 2 colors Red and Green.
Bearing 5: B and 1 colors Green and Yellow.
Bearing 6: C and 3 colors Red and Red.
Bearing 7: C and 1 colors Green and Green.
The color combination Yellow and Red must not be fitted.