LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1452 (Brakes - Repair - E91) >> 3421 Rear Brakes >> 34 21 947 Precision-turning both rear brake discs on both sides >> Stationary brake disc lathe

Stationary brake disc lathe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only BMW-approved brake disc lathes may be used!

In the case of stationary brake disc lathes, the brake disc must be removed. See 3421320 REMOVING AND INSTALLING/REPLACING BOTH REAR BRAKE DISCS (BREMBO)  or 3421320 REMOVING AND INSTALLING/RENEWING BOTH BRAKE DISCS .

Please refer to the lathe manufacturer's instruction manual for the exact procedure.

Fig 1: Identifying Stationary Brake Disc Lathe
G04726610Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals