Special tool 33 2 100

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Secure output shaft against falling out.

Screw on special tools 33 2 111, 33 2 117 and 33 2 116 with all wheel bolts to drive flange.

Press output shaft out of drive flange; in so doing, grip basic body 33 2 116 with special tools 33 2 202 and 33 5 070 .

Fig 1: Securing Output Shaft Using Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: No oil permitted on shaft journal thread!

Lightly oil spline teeth of output shaft.

Insert output shaft into drive flange.

Screw special tool 33 2 118/33 2 119 onto output shaft.

Fig 2: Installing Special Tool 33 2 118/33 2 119 Onto Output Shaft

Courtesy of BMW OF NORTH AMERICA, INC.

Mount special tool 33 2 116 with three wheel bolts to drive flange.

Pull in output shaft with special tool 33 2 115 up to stop; in so doing, grip basic body 33 2 116 with special tools 33 2 202 and 33 5 070 .

Fig 3: Installing Output Shaft Using Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.