Replacing radial shaft seal

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Pull out radial shaft seal with special tool 00 5 010 .

Fig 1: Pulling Out Radial Shaft Seal Using Special Tool (00 5 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Drive in new radial shaft seal with following special tools (depending on REAR DIFFERENTIAL ) as far as it will go.

168L: Use special tools 00 5 500 and 33 3 390
188L/188LW: Use special tools 00 5 500 and 33 3 470
215L/215LW/215 with lock: Use special tools 00 5 500 and 33 3 440

Fig 2: Driving In Shaft Seal Using Special Tools 33 3 390, 33 3 440 And 33 3 470

Courtesy of BMW OF NORTH AMERICA, INC.