LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1247 (Body Equipment - Repair - E90) >> 5122 Rear Door Locks, Handles, Fittings >> 5122330 Removing and installing/replacing window cavity cover strip on inside rear door >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The "INSTRUCTIONS ON FITTING WINDOW GUIDE SEALS " serve as the basis for this repair instruction and must be observed without fail.

Pull window cavity cover strip at front (1) and rear (2) from rear door.

Installation: 

If necessary, replace faulty retainers (3).

Moisten window cavity cover strips (1 and 2) prior to fitting with APPROVED ANTI-FRICTION AGENT .

Fig 1: Removing Window Cavity Cover Strip
G05503791Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals