LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1164 (Cooling System - Repair - N52 - E90) >> 1711 Engine Radiator With Attachment >> 17 11 063 Removing and installing/replacing both radiator brackets (N54, N52, N52K, N51, N53) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Release bolt.

Tightening torque 17 11 1AZ .

Fig 1: Locating Radiator Bracket Bolt
G04725848Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1).

Fig 2: Removing Holder
G04725849Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals