11 14 010 Replacing Vacuum Pump Sealing Cover (N54)
Special tools required:
- 11 8 531
- 11 8 532
- 11 8 533
- 11 8 535
- 11 8 544
Necessary preliminary tasks:
- Remove fan cowl.
- Remove alternator drive belt. (See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N54) )
- Remove both drive belt tensioners. (See 11 28 020 REPLACE ALTERNATOR DRIVE BELT TENSIONER (N54) )
NOTE:
For purposes of clarity, illustrations show alternator and servo pump.
Secure special tool 11 8 531 with special tool 11 8 535.
Twist out special tool 11 8 533 in direction of arrow until special tool 11 8 532 is released from mounting.
Secure special tool 11 8 532 against falling down.
Position special tool 11 8 532 by hand on sealing cover.
Screw in special tool 11 8 544.
NOTE:
The sealing cover is pressed out diagonally during this work step
Screw in new sealing cover (1) with special tools 11 8 532 and 11 8 533 until flush with housing.
Assemble engine.