62 11 280 Removing and installing (replacing) instrument cluster

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

NOTE: Extend steering wheel completely and lower.

Release bolts (1).

Tightening torque: 1.5 Nm.

Fold back instrument cluster (2) in direction of arrow and pull back slightly.

Disconnect associated plug connection.

If necessary, feed out/unclip associated wiring harness.

Remove instrument cluster (2).

Fig 1: Identifying Instrument Cluster And Mounting Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: