51 16 212 Removing and installing trim for storage compartment

Special Tools Required: 

• 00 9 317 

Necessary preliminary tasks: 

Version with manual transmission: 

• Remove Gaiter For Gear Lever 

Version with automatic transmission: 

• Remove Finisher For Preselector Lever  

Release trim (1) with special tool 00 9 317  from retainers (2).

If necessary, disconnect plug connections and remove trim (1) towards top.

Installation: 

Following parts on trim (3) must not be damaged or missing:

1. Clips
2. 4 x foam material
   Fig 2: Trim, Clips And Foam Material

   Courtesy of BMW OF NORTH AMERICA, INC.