26 20 000 Removing and installing front propeller shaft

IMPORTANT: Do not move vehicle with drive power once propeller shaft has been removed.

IMPORTANT:

Replacement only:

Perform functional check of transfer box (calibration) according to installation with BMW diagnosis and information system under control unit function.

Necessary preliminary tasks:

Remove underbody protection

Release screws.

Installation note:

Replace ZNS bolts.

Tightening torque, 26 11 9AZ .

Fig 1: Locating Front Propeller Shaft Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Remove propeller shaft.

Installation note:

Replace ZNS bolts.

Tightening torque, 26 11 9AZ .

Fig 2: Locating Rear Propeller Shaft Screws

Courtesy of BMW OF NORTH AMERICA, INC.