71 60 051 Replacing complete trailer tow hitch
IMPORTANT:
When retrofitting a trailer tow hitch, it is absolutely essential to read and comply with the Notes on retrofitting a trailer towing device .
Necessary preliminary tasks:
- Remove Rear Bumper Trim
- If necessary, release exhaust system suspension elements
Release screws (1) on both sides.
Unclip cable from fixture.
Remove trailer tow hitch support member (2).
Disconnect all plug connections.
Tightening torque: 59 Nm.
Installation:
Vehicles up to production date 07.03.2005 only:
Knock out studs (1) towards inside and replace with M12x40 hexagon bolts.
Tightening torque: 59 Nm.