52 26 070 Removing and installing/replacing filler element (coupe)

Reach between filler element (1) and backrest.

Unclip filler element (1) towards front and lift out.

Fig 1: Identifying Filler Element And Backrest

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert filler element behind guide of rear seat.

Press down filler element firmly.

Metal eyelet must snap noticeably and audibly into place on retaining clip (1).

Fig 2: Identifying Retaining Clip And Filler Element

Courtesy of BMW OF NORTH AMERICA, INC.