51 61... Removing and installing/replacing front rollover protection system strut (convertible)
IMPORTANT:
Risk of damage!
Driving without the strut is not permitted!
Driving without the strut is not permitted!
Necessary preliminary tasks:
- Remove backrest. See SEATS - REPAIR .
- Remove PANEL FOR PASSENGER COMPARTMENT PARTITION
Release screws (1).
Tightening torque: 56 Nm
Angle of rotation: 100°
Release screws (2) and remove strut (3).
Tightening torque: 56 Nm
Angle of rotation: 100°
Installation:
Replace all screws.