51 71... Removing and installing/replacing multifunction pan

Necessary preliminary tasks:

Release screws (1).

Remove guide (2).

Fig 1: Multifunction Pan Guide And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Multifunction Pan Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

For tightening torque refer to 51 71 9AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Multifunction Pan Mounting Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Seals And Multifunction Pan

Courtesy of BMW OF NORTH AMERICA, INC.