21 2 140 Clutch centering mandrel (2 x)

Minimum set: Mechanical tools

Note: For centering clutch disc on flywheel while installing self-adjusting clutch (SAC) - Phase-in of SAC in E46, 09/97

Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z, S6S 420G, S6S 560G

Storage location: C5

SI number: 1 13 96 (104)

Order number: 21 2 140 Clutch centering mandrel (2 x)

Consisting of:

1 = 21 2 141 Clutch centering tool

Note: With M10 screw - Transmission: S6S 420G, S6S 560G

2 = 21 2 142 Clutch centering tool

Note: With M10 screw - Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z

Fig 1: Identifying Clutch Centering Mandrel (21 2 140) Components

Courtesy of BMW OF NORTH AMERICA, INC.