61 31 115 Replacing rocker switch for side window operation (switch cluster, front)

IMPORTANT: Carry out the following work step carefully in order to avoid damaging door trim panel and rocker switch.

Carefully lever out rocker switch for side window operation (1) with special tool 00 9 340 at specified points (2).

Remove rocker switch for side window operation (1) from door trim panel (3) slightly.

Disconnect associated plug connection and remove rocker switch for side window operation (1).

Fig 1: Identifying Special Tool (00 9 341), Side Window Operation Switch, Specified Points, And Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining clips (1) of rocker switch for side window operation (2) must not be damaged or missing.

Make sure rocker switch for side window operation (2) is correctly seated.

Fig 2: Identifying Clips And Side Window Operation Switch

Courtesy of BMW OF NORTH AMERICA, INC.