61 35 201 Removing and installing/replacing LCPA module

Necessary preliminary tasks: 

• Remove Rear Seat 
• Remove Armrest Side Section On Rear Seat Backrest 
• Remove Decorative Strip From Side Trim Panel 
• Remove Rear Side Trim Panel 

Disconnect plug connection (1).

Unlock catch (2) and remove LCPA module (3) in direction of arrow.

Fig 1: Identifying Catch, LCPA Module, Plug Connection And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed guide (1) of LCPA module (2) correctly into locator (3).

Fig 2: Identifying Guide, Locator And LCPA Module

Courtesy of BMW OF NORTH AMERICA, INC.