51 13 116 Removing and installing cowl panel cover
Necessary preliminary tasks:
- Remove Windscreen Wiper Arm on left/right
- Remove Microfilter Housing
Pull off hose (1).
Disconnect plug connections (2).
Detach mucket (3).
Take off cover (4).
Installation:
Make sure cover (4) is correctly seated.
Installation:
Sealing strip (1) must be fitted (water ingress)
If necessary, retrofit sealing strip (1).
Installation:
Make sure grommets (1) are correctly seated on wiper pivots.
Grommets (1) for wiper pivots must not be damaged.
If necessary, replace grommets (1).
Necessary preliminary tasks:
- Remove Windscreen Wiper Arm on left/right
- Remove Microfilter Housing
Pull off hose (1).
Disconnect plug connections (2).
Detach mucket (3).
Take off cover (4).
Installation:
Make sure cover (4) is correctly seated.
Installation:
Sealing strip (1) must be fitted (water ingress)
If necessary, retrofit sealing strip (1).
Installation:
Make sure grommets (1) are correctly seated on wiper pivots.
Grommets (1) for wiper pivots must not be damaged.
If necessary, replace grommets (1).
E90/E91 only:
Installation:
Cowl panel cover (1) must be correctly guided on right and left under windscreen cover (2).
E92/E93 only:
Installation:
Cowl panel cover (1) must be correctly guided on right and left under windscreen cover (2).