E60, E61, E63, E64, E87, E90: Bluetooth Mobile Phone In Snap-In Adapter

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 645Ci, 2005 BMW 545i, 2005 BMW 530i, 2005 BMW 525i, and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Installation location The bluetooth mobile phone is engaged in the snap-in adapter on the base plate.

Construction

Fig 1: Identifying E60, E61, E63, E64, E87, E90: Bluetooth Mobile Phone In Snap-In Adapter

Courtesy of BMW OF NORTH AMERICA, INC.

E60, E61, E63, E64, E87, E90: BLUETOOTH MOBILE PHONE IN SNAP-IN ADAPTER LEGEND

Key	Explanation	Key	Explanation
1	Snap-in adapter	2	Bluetooth mobile phone, e.g. Siemens S55

NOTE: Approved bluetooth mobile phones

Information about bluetooth mobile phones approved by BMW is available from the BMW Parts Service. A compatibility matrix is available there.
The following bluetooth mobile phones are currently approved:
- Siemens S55
- Siemens S65
- Sony Ericsson T610
- Sony Ericsson T630
- Nokia 6310i
- Motorola V525
- Motorola V600

How it works

Each bluetooth mobile phone that corresponds to the bluetooth radio standard can be operated in a matching snap-in adapter.

Once engaged in the snap-in adapter, the bluetooth mobile phone is connected to the ULF charge management circuit in the ULF control unit and to the GSM antenna (Global System for Mobile communication).