13 71 Air Intake Silencer
INTAKE SILENCER SPECIFICATION
| - | Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Air duct, compressor 1, to intake muffler | N54 | Hose clamp | - | 3 Nm |
| 2AZ | Air duct, compressor 2, to intake muffler | N54 | Hose clamp | - | 3 Nm |
| 3AZ | Air duct, compressor 1+2, to crankcase/cylinder head | N54 | M6 x 25 | - | 9 Nm |
| 4AZ | Charge-air duct to bracket | N54 | M6 x 20 | - | 9 Nm |
| 5AZ | Intake duct to front wall | N54 | Self-tapping screw | - | 2 Nm |
| 6AZ | Charge-air duct Intercooler before throttle valve assembly to charge-air duct Intercooler to throttle valve assembly | N54 | Screw hose clamp with tensioning spring | - | 4.5 Nm |
| 7AZ | Raw air snorkel/Pit sensor to charge-air duct | N54 | Oval-head screw for thermoplastic | - | 2 Nm |
| 8AZ | Bracket, air duct, compressor 2, to cylinder head | N54 | M6 x 15 | - | 9 Nm |
| 9AZ | Charge-air duct to compressor outlet | N54 | V-band clamp | - | 3.5 Nm |