51 16 260 Removing and installing/replacing front section of rear console trim

Apply special tool 00 9 317 at side and unclip trim (1) in upward direction from retaining clips (2).

If necessary, disconnect plug connections and remove trim (1).

Installation:

Clips (2) must not be damaged.

Fig 1: Clips, Trim And Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove ashtray/oddments tray (2).

Release screws (3) and remove oddments tray/fresh-air grille (4).

Fig 2: Screws, Ashtray/Oddments Tray And Oddments Tray/Fresh-Air Grille

Courtesy of BMW OF NORTH AMERICA, INC.