51 37 242 Replacing outer window cavity weather strip for rear left or right side window (coupe)

IMPORTANT: Window cavity weather strip must be replaced after every removal.

NOTE: Window cavity weather strip (1) is attached with retaining clip (2) to trim strip (3).

Pull window cavity weather strip (1) in direction of arrow off side window glass.

If necessary, position special tool 00 9 317 on window cavity weather strip (1) and knock off from retaining clip (2).

Installation:

Make sure clip (2) is correctly seated.

Fig 1: Window Cavity Weather Strip, Trim Strip, Retaining Clip And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.