51 16 340 Removing and installing/replacing lock for right glovebox (with airbag)

Open glovebox.

Release screws (1).

Remove lower section (3) and upper section (2) of lock.

Fig 1: Screws, Glovebox Lock Lower Section, Glovebox Lock Upper Section And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Insert ignition key (1) in lock cylinder (3).

Turn ignition key (1) slightly, carefully raise catches (2) and pull out lock cylinder (3) with ignition key (1) in direction of arrow.

If necessary, force catches (2) open.

Fig 2: Ignition Key, Lock Cylinder, Catches And Installation Direction

Courtesy of BMW OF NORTH AMERICA, INC.