51 71 447 Removing and installing or replacing panel for cover on left or right side member

Necessary preliminary tasks:

Release expansion rivets (1) and screws (2).

Fig 1: Panel Cover Expansion Rivets And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Panel Cover Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip panel (1) at front.

Unclip rear panel (1) from holder (2).

Open door and remove panel (1) in direction of arrow.

Fig 3: Panels, Panel Holders And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on holder (2) must not be damaged.

Fig 4: Catches And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, detach holders (1) from body and fit on panel (2).

If necessary, replace faulty holders (1).

Fig 5: Holders And Panel

Courtesy of BMW OF NORTH AMERICA, INC.