22 11 Engine Suspension
ENGINE SUSPENSION TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52 / E85 / E86 | 42 Nm | ||
| E60 / E61 / E63 / E64 / E65 / E66 / E67 / E92 | M8-8 | 19 Nm | ||
| E60 / N54 | M8-8 | 21 Nm | ||
| E53 | M8-10.9 | 30 Nm | ||
| E87 / E90 / E91 / E92 / E70 / E83 / E81 | M8 10.9 | 28 Nm | ||
| E70 / E83 | M10 | 38 Nm | ||
| 2AZ Engine mount to engine support arm | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E53 / E83 / E87 / E90 / E91 / E92 / E70 / E81 | M10 10.9 | 56 Nm | |
| E65 / E66 / E67 | M12 10.9 | 100 Nm | ||
| E70 / E83 | M12 | 68 Nm | ||
| E85 / E86 / E52 | 42 Nm | |||
| E92 | M10 | 38 Nm | ||
| 3AZ Engine support arm to engine | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E83 / E87 / E90 / E91 / E70 / E81 | M10 8.8 | 38 Nm | |
| E60/61 N52 / E63/64 N52 / E83/85 N52 / E86 N52 / E87/ 90 N52 / E91 N52 / E65 N52 / E92 N51/N52 / E70 N52 | M12 | Aluminium screws marked blue must be replaced | ||
| Jointing torque | 34 Nm | |||
| Torque angle | 90° | |||
| E60 / E61 / E65 / E66 / E67 | M8 8.8 | 19 Nm | ||
| E85 / E83 | M8 8.8 | 21 Nm | ||
| E53 (N62/M54) | 38 Nm | |||
| E53 (M57) | 65 Nm | |||
| E92 / E90 (N54) | M12 | 66 Nm | ||
| E60 (N54) | M12 | 66 Nm | ||
| 4AZ Engine mount to mounting bracket | E65 / E60 / E61 / E63/E64 | M8 8.8 | 19 Nm | |
| 5AZ Mounting bracket to front axle carrier | E65 / E60 / E61 / E63 / E64 | M8-8 | 19 Nm | |
| 6AZ Vibration damper to engine carrier | E70 | 19 Nm |