64 22 190 Removing and installing/replacing fresh air grille in rear of car
NOTE:
For Special Tool identification, see AIR CONDITIONING & HEATING - SPECIAL TOOLS - X5 .
Special Tools Required:
- 00 9 340
Lever out storage box (1) with special tool 00 9 340 and remove.
Loosen screws (1).
Installation:
Ensure that air duct (2) is correctly seated.
Pull out fresh-air grill (1) in direction of arrow.
Installation:
Snap journals (1) into place in openings (2).
Disconnect plug connections (1).
If necessary, disconnect plug connections on switch for seat heating.
Remove fresh air grill (2).
Replacement:
Unclip cigarette lighter (3).
If necessary, unclip switch for seat heating.