Removal & Installation (4-spoke Steering Wheel)
WARNING: This page is about a different car, the 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Using T30 Torx bit, remove 2 air bag module mounting screws from back side of steering wheel. Pull air bag module away from steering wheel and disconnect 2 connectors, then remove air bag module.
- To install, reverse removal procedure. Tighten air bag module mounting screws to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.