12 61 280 Removing and installing/replacing oil pressure switch (N62)

Necessary preliminary tasks: 

• Switch off ignition
• Remove intake hood with air intake hose. See INTAKE FILTER & HOSE .

Installation location: 

Cylinder bank 1 to 4 on cylinder head, front right.

Engine oil may emerge when oil pressure switch is replaced; have a cleaning cloth ready.

Unlock and detach plug connection (1).

Unscrew oil pressure switch (2).

Tightening torque, see ENGINE ELECTRICAL SYSTEM - TIGHTENING TORQUES .

Installation: 

Check engine oil level, top up engine oil if necessary.