23 41 External Gearshift Components
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - EXTERNAL GEARSHIFT COMPONENTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Servomotor / actuator to transmission housing Insert screws with screw securing adhesive | D / G / H SMG transmission | M6 | 10 Nm | |
| 2AZ Switch for gear recognition to servomotor | D SMG transmission | M5 | 6 Nm | |
| 3AZ Hydraulic lines to servomotor | D SMG transmission | M12x1 | 17 Nm | |
| 4AZ Actuator to transmission casing | D SMG transmission | M8 | 25 Nm | |
| 5AZ Reversing light switch | B / C / D / E / F / G / H / I / J-transmission | M12 | 16 Nm | |
| 6AZ Pressure accumulator to valve block | C / G / H SMG transmission | 30 Nm | ||
| 7AZ Protective plate Expansion tank Shift actuator Hydraulic pump Valve block to transmission housing Ground strap to transmission housing | C / G / H SMG transmission | M6 | 10 Nm | |
| 8AZ Protecting plate / valve block to transmission housing / | C / G / H SMG transmission | M8 | 20 Nm | |
| 9AZ Valves to valve block | C / G / H SMG transmission | M4 | 3.5 Nm | |
| 10AZ Pressure sensor to valve block | C / G / H SMG transmission | 15 Nm | ||
| 11AZ Shift/selector sensor to transmission housing | C / G / H SMG transmission | M4 | 2.8 Nm | |
| 12AZ Retaining screw for hydraulic line | C / G / H SMG transmission | 18 Nm | ||
| 13AZ Banjo bolt for hydraulic line | C SMG transmission | 16 Nm | ||
| 14AZ Heat shield to expansion tank/pump bracket | H transmission | 6 Nm | ||
| 15AZ Clutch speed sensor | G / H-transmission | 35 Nm | ||
| 16AZ Transmission oil cooler to transmission | E60 / E63 / E64 / E61 | 7-speed SMG M6x35 | 10 Nm | |
| 17AZ Transmission oil screen in transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M18 | 25 Nm | |
| 18AZ Banjo bolt to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M16x1.5 | 40 Nm | |
| 19AZ Union nut to screwed socket | E60 / E63 / E64 / E61 | 7-speed SMG | 40 Nm | |
| 20AZ Oil cooler connection to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG | 40 Nm | |
| 21AZ Oil pump to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M6x20 | 10 Nm | |
| 22AZ Speed sensor to transmission | E60 / E63 / E64 / E61 | 7-speed SMG M6x16 | 10 Nm | |
| 23AZ Temperature and pressure sensor to hydraulic unit | E60 / E63 / E64 / E61 | 7-speed SMG | 15 Nm | |
| 24AZ Clamp, pressure accumulator to transmission | E60 / E63 / E64 / E61 | 7-speed SMG | 22 Nm | |
| 25AZ Pressure accumulator to pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 29 Nm | |
| 26AZ Pump block to transmission | E60 / E63 / E64 / E61 | 7-speed SMG | 22 Nm | |
| 27AZ Banjo bolts, pressure lines clutch actuator and pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 25 Nm | |
| 28AZ Screws, actuator block | E60 / E63 / E64 / E61 | 7-speed SMG | 25 Nm | |
| 29AZ Union nut, hydraulic line, actuator block | E60 / E63 / E64 / E61 | 7-speed SMG | 11 Nm | |
| 30AZ Pump to electric motor | E60 / E63 / E64 / E61 | 7-speed SMG | 5 Nm | |
| 31AZ Electric motor to pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 5 Nm |