51 71 470 Removing and installing/replacing trim on front left or right wheel arch

Necessary preliminary tasks: 

• Remove cover on sill, see 51 71 472 Removing and installing/replacing cover on left or right sill 

  Build date up to 09/2004: 

• Remove trim on front side panel

Release blind rivets (1) and expander rivet (2).

Snap out trim (4) at clips (3) and feed out.

Installation: 

If necessary, replace expander rivet (2) and/or clip (3).

Make sure trim (4) is correctly seated on underbody protection and bumper.

Version with M Technic aerodynamic kit: 

Release blind rivets (1) and screw (2).

Snap out trim (4) at clips (3) and feed out.

Installation: 

If necessary, replace faulty clips (3).

Make sure trim (4) is correctly seated on underbody protection and bumper.