51 12 827 Removing and installing / replacing guide for bottom rear bumper

Necessary preliminary tasks:

All models except M6:

Release nuts (1) on guide (2).

Remove guide (2).

Installation:

If necessary, replace faulty nuts (1).

Fig 1: Removing Faulty Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

M6 only:

Bend guide (1) downwards slightly and release nuts (2) behind.

Remove guide (1).

Installation:

If necessary, replace faulty nuts (2).

Fig 2: Removing Guide

Courtesy of BMW OF NORTH AMERICA, INC.