51 16 340 Removing and installing/replacing lock for right glovebox

Open glovebox.

Release screws (1).

Remove lower section of lock for right glovebox (3).

Remove upper section of lock for right glovebox (2).

Fig 1: Removing Upper Section Of Lock For Right Glovebox

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Insert ignition key (1) in lock cylinder (3).

Turn ignition key (1) slightly and pull out lock cylinder (3) with ignition key (1) in direction of arrow.

If necessary, force catches (2) open.

Fig 2: Inserting Ignition Key In Lock Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.