51 34 171 Replacing rear left or right door window
Necessary preliminary tasks:
- Open door window to 345 mm.
- Remove SOUND INSULATION in rear door..
- Remove OUTER WINDOW CAVITY COVER STRIP .
- Remove COVER ON DOOR WINDOW FRAME .
- Remove TRIM ON REAR DOOR WINDOW FRAME .
- Remove RUBBER GUIDE FOR REAR DOOR WINDOW GLASS .
Open door window glass (1) down to distance (A)
(A) = approx. 345 mm
Release screw (2).
Tightening torque: see 3AZ in 51 35 POWER WINDOWS, REAR .
IMPORTANT:
Danger of locking in position!
Disconnect plug connection (1) at power window motor (2).
Feed out door window glass (1) towards top rear.
Installation:
Door window glass (1) does not need to be adjusted.
NOTE:
Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).