51 16... Removing and installing / replacing front insert (on storage compartment trim)

Necessary preliminary tasks:

Security version:

Build date up to 03/2007:

Release screws (1) and remove insert (2).

Fig 1: Removing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully release pin (1) from catch (2) and remove decorative trim from insert (3).

Installation:

Pin (1) and catch (2) must not be damaged.

Fig 2: Removing Decorative Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2007:

Release screws (1) and remove insert (2).

Fig 3: Identifying Insert And Screws

Courtesy of BMW OF NORTH AMERICA, INC.