51 71... Removing and installing/replacing multifunction pan (M5)

Necessary preliminary tasks:

Release screws (1).

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Release screws (1).

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove insert shells (1).

Fig 3: Identifying Insert Shells

Courtesy of BMW OF NORTH AMERICA, INC.

Remove control units (1), lay to one side and secure.

Fig 4: Identifying Control Units

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts along line (1) and remove multifunction pan.

Tightening torque: 3 Nm

Fig 5: Locating Nuts Along Line

Courtesy of BMW OF NORTH AMERICA, INC.

Gasket (1) on multifunction pan must not be damaged; replace multifunction pan if necessary.

Fig 6: Identifying Gasket

Courtesy of BMW OF NORTH AMERICA, INC.