51 23 110 Removing and installing/replacing left hood/bonnet lock

Release screws (1) and remove hood/bonnet lock (2) in direction of arrow.

Tightening torque: see 2AZ in 51 23 HOOD/BONNET LOCKS .

Fig 1: Removing Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable (1) in direction of arrow from hood/bonnet lock (2).

Fig 2: Disconnecting Bowden Cable From Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.