52 25 030 Removing And Installing Complete Armrest For Rear Seat Backrest

Necessary Preliminary Tasks:

Unclip cover (2) in area (1) and remove towards front.

Release screws (3).

Installation:

For tightening torque refer to 52 25 4AZ in SEATS - TIGHTENING TORQUES .

Disconnect plug connections.

Remove armrest (4).

Fig 1: Armrest, Cover, Area, Retaining Screws And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Ski bag or cooler box option:

Unclip cover (2) in area (1) and remove towards front.

Fig 2: Clips Area, Cover And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.