12 52 Plug Connectors, Terminals
PLUG CONNECTORS, TERMINALS - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 8AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder for modules | E36 | M6 | 9 N.m. | |
| 2AZ Ground connections Flange nut | E36 | 16 N.m. | ||
| 3AZ Cover on heating splash wall | E36 | 1.1 N.m. | ||
| 4AZ Battery positive cap to cylinder head cover | M67 | M5 | 6 N.m. | |
| 5AZ Wiring harness (term.50) to starter motor | M57TU / M67 | M6 | 8 N.m. | |
| 6AZ Wiring harness (term.30H) to starter motor | M57TU / M67 | M5 | 5 N.m. | |
| 7AZ Battery positive lead (term.30) to alternator (B+) | M57TU / M67 | M8 | 15 N.m. | |
| 8AZ Cable duct to cylinder head. | M57TU | M6x12 | 4 N.m. |