51 16 365 Removing And Installing/Replacing Glovebox Cover (Without Active Knee Protection)

Necessary preliminary tasks:

Open glovebox.

Release clip (1) and detach retaining strap (2).

Fig 1: Detaching Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Release clip (1) and detach damper (2).

Close glovebox.

Fig 2: Detaching Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove counter-supports (2).

Unlock glovebox (3) and remove.

Fig 3: Identifying Counter-Supports And Glovebox

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Adjust glovebox (1) to instrument panel (2):

A = approx. 5 mm

B = approx. 4 mm (centre)

Check function.

Fig 4: Identifying Glovebox And Instrument Panel

Courtesy of BMW OF NORTH AMERICA, INC.