61 31 203 Replacing Switch Combination For Seat Adjustment

Special tools required:

CAUTION: Set down center armrest on a suitable surface.

Release screws (1).

Lever out front center armrest trim (2) with special tool 00 9 341 and remove and direction of arrow.

Fig 1: Identifying Special Tool (00 9 341)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Fig 2: Identifying Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out switch combination for seat adjustment (2) in direction of arrow.

Fig 3: Identifying Switch Combination And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure guides (1) are correctly seated in mountings (2).

Fig 4: Identifying Guides And Mountings

Courtesy of BMW OF NORTH AMERICA, INC.